Type: Driver
File Name:
File Size: 22.8 MB
44 (4.74)
Downloads: 37
Supported systems: Windows 2008, Windows XP, Windows Vista, Windows 7/8/10
Price: Free* (*Free Registration Required)

Download Now

Page Print Cartridge-related Messages Install a print cartridge.

Phaser™ 3600

Invalid Toner The print cartridge you have Install a Xerox-genuine print cartridge, designed for your printer. Toner Low The print cartridge is almost Take out the print cartridge and thoroughly shake it. By doing this, you can temporarily empty. PS as your default printer. The printer cover Close the printer cover. Page 59 Condition Possible cause Xerox phaser 3600 pcl 6 solutions Condition Possible cause Suggested solutions Print job is The job may be Reduce the complexity of the The paper There is too much Remove excess paper from extremely very complex.

Driver for Printer Xerox Phaser - [Download

Page Solving Print Quality Problems Solving print quality problems Condition Possible cause Suggested solutions Pages print, The print Redistribute the print Dirt inside of the printer or improper paper loading may reduce print but are cartridge is cartridge. See page 8. See the table below to troubleshoot problems. Skip to main content. Printer Xerox phaser 3600 pcl 6 Printer Supplies.

The fusing area may be hot. Do not touch the green surface undersid e of the print cartridge. The display shows the percentage of the remaining toner. Note If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

Phaser Printer Argecy

Caution Do not use sharp objects, such as a knife or scissors, to open the print cartridge package. They might scratch the drum of the cartridge.

Replacing the print cartridge Thoroughly roll the cartridge to assure maximum copies per cartridge. Save the box and the plastic bag for shipping. When the print cartridge is completely empty: Toner Low Replace Toner appears on the display. The Status LED lights red.

At this stage, the print cartridge needs to be xerox phaser 3600 pcl 6. For order information for print cartridges, see page 7. Do not touch the green surface underside of the print cartridgeprint cartridge. Use the handle on the cartridge to avoid touching this area. Carefully pull the tape out of the cartridge and discard it.

Make sure that the cover is securely closed. Holding the print cartridge, pull the sealing tape straight to 1 Press Menu until System Setup appears on the bottom line of the remove it from the cartridge.

Be careful not to cut the tape. If display and press OK. Refer to the helpful pictures on the cartridge wrapping paper.Product downloads for Phaser Phaser Support & Drivers Phaser Win8 & 10 bit and bit PCL6 Print Driver. PCL; V3 Driver; WHQL. Xerox phaser 3600 pcl 6 downloads for Phaser File Download: Phaser Windows Drivers and Utilities.


Filename Installation package includes PCL6, and PS drivers.

Related Posts